NOVUS AUTOMATION
29/34
7.3
DIAGNOSTICS
You can view the
DigiRail Connect
diagnostics tab by clicking the
Diagnostics
button located on the
NXperience
home screen. The following
sections describe each of the configuration passable parameters and their particularities.
7.3.1
DIGITAL INPUTS
Fig. 36
– Diagnostics: Inputs
•
Channel Tag:
Displays the channel tag, defined in the
Tag
parameter of each digital input.
•
State:
Displays the current value displayed by the channel.
•
Function:
Displays the function configured for each channel, defined in the
Function
parameter of each digital input.
o
Pause:
Available for
Counter
and
Integrator
functions. Allows pausing the counter/integrator value. This button is used to pause and to
resume the counter/integrator.
•
Preset:
Allows you, when clicking the
button, to apply to the channel the value previously configured in the
Preset
parameter of the
digital input.
•
Forcing Value:
Allows you to force a specific value for each digital input channel by entering the desired value and clicking the
button. When executing this function, the
State
parameter will adopt the forced value. To stop forcing, just click the
button.
•
Update Forcing:
Allows you to update the forcing values of the already forced channels by clicking the respective button.
7.3.2
ANALOG INPUTS
•
Channel Tag:
Displays the channel tag, defined in the
Tag
parameter of each analog output.
•
State:
Displays the current value displayed by the channel.
•
Unit:
Displays the unit configured for each analog input, set in the
Unit
parameter of each analog input.
•
Status:
Displays the status of each analog input.
OK
means there is no error in the analog input.
NOK
means there is an error in the analog
input.
•
Forcing Value:
Allows you to force a specific value for each digital input channel by entering the desired value and clicking the
button. To stop forcing, just click the
button.
•
Update Forcing:
Allows you to update the forcing values of the already forced channels by clicking the respective button.