25
Operation
3.5 Making Measurements
The System Status Submenu (Figure 3.5.1) lets you make measurements of various UPS
inputs, outputs and other values. You can also use the Novus FXM Monitor software to make
these measurements (
See
Section 4.6, “FXM Monitor Graphical User Interface”).
Procedure
1. From the Logo Screen (Figure 3.1.1)
go to the System Status menu (Figure
3.1.3).
2. Press the
SELECT
button to enter the
submenu (Figure 3.5.1).
3. Press the
SCROLL
button to move
between items in the submenu. When
you have reached the item you want to
measure, stop pressing the button.
The measurement is automatically
displayed on the LCD. It is automatically
updated ever 0.5 seconds (VIN shown).
Measurement Finished
Cancel
Scroll
Select
STATUS
MENUS
120/60/N
LINE
VIN
120V
120/60/N
LINE
System Status Submenu
LCD Shows
Meaning
Description
VIN
Input Voltage
The line input voltage into the UPS.
VOUT
Output Voltage
The UPS’s output voltage (true RMS).
IOUT AC
Output Current (AC)
The UPS’s AC output current (true RMS).
INTL TEMP
Internal Temperature
The temperature inside the UPS (°C).
BATT TEMP
Battery Temperature
The battery’s temperature (°C).
FREQ IN
Input Frequency
The frequency of line power into the UPS (Hz).
OUTPUT PWR
Output Power
The UPS’s output power in VA (true RMS).
BATT VOLT
Battery Voltage
The battery’s output voltage (VDC).
Figure 3.5.1
System Status Submenu
Continued On the Next Page
Summary of Contents for 500
Page 2: ...Power Alpha Technologies ...
