background image

 

1. After each use rinse the cabin thoroughly with 
clean  water  and  wipe  with  soft  damp  cloth 

– 

prolonged  contact  of  the  cabin  surface  with 
personal  care  products  may  cause  damage  to 
the  surface  or  corrosion  of  metal  elements.  
Leave  the  cabin  door  open  until  it  is  completely 
dry  and  ensure  proper  ventilation  of  the  room. 
The cloth used must not contain any abrasive or 
scratching fibres.  

2.  Clean  the  cabin  surface  with  the  use  of  mild 
detergents  and  soft  cloth. We recommend using 
solution  of  liquid  soap.  After  cleaning,  rinse  the 
cabin  thoroughly  with  clean  water  and  dry 

– 

prolonged  contact  of  the  cabin  surface  with 
detergents may cause damage to the surface or 
corrosion of metal elements.

 

Do  not  use  aggressive  agents  containing 
caustic,  irritant  or  abrasive  substances. 
They  may  damage  the  cabin  surface.  The 
cloth  used  must  not  contain  any  abrasive  or 
scratching fibres. 

3. To remove residue of calcium or limescale use 
citric  acid  dissolved  in  water  1:5.  Rinse  the 
descaled  surfaces  thoroughly  with  clean  water 
and  dry.  Prolonged  contact  of  the  cabin  surface 
with  descaling  agent  may  cause  damage

 

to  the 

surface or corrosion of metal elements.

 

4

.  In  case  of  small  scratches  on  the  surface  of 

the shower tray, sand  wet damaged surface with 
sand  paper  (#2000),  and  then  polish  it  with 
polishing paste and polishing equipment.

 

5.  Inspect  the  condition  of  the  consumable  parts 
such  as  hinges,  seals,  light  bulbs,  shower  hose, 
at  least  once  a  month.  Replace  any  used  up 
elements.  Wear  or  damage  of  consumables  is 
not a basis for a complaint. 
6. Descale the water jets in the shower head, jets 
on  the  shower  panel  and  rain  shower  head  on 
regular  basis.  Blockage  of  those  elements  may 
lead  to  damage  or  defect  of  elements  of  cabin 
plumbing 

system. 

Replace 

any 

used 

up 

elements.  Wear  or  damage  of  such  elements  is 
not a basis for a complaint. 
7. At least  once  a month  inspect  the  condition  of 
the water filter and if needed clean it or replace it. 
Dirty  or  damaged  filter  may  cause  decrease  of 
water flow  and in  extreme  cases  also  damage  of 
the elements of the cabin plumbing system. 
 
 

Rev.  19/08/2014 

 

MAINTENANCE 

Summary of Contents for Kerra Tuluza


























Reviews: