37
This user manual must be handed to the customer and must be kept in a safe place throughout the whole period of use!
EN
ATTENTION:
The safety elements must not be manipulated, nor put out of service, as this implies a serious
risk to people.
The door has been designed and built in accordance with the applicable European regulations, incorporating
safety devices:
• Power cut-off device located on the machine‘s control panel, the select and supply of which is the client’s
obligation.
• Safety edge (optical sensors):
The safety edge is an infra-red beam guided in a rubber profile located at the bottom of the canvas. When the
rubber profile is pressed, the infra-red beam is interrupted and a signal change occurs. A re-open command
is generated and the door is automatically raised.
• Photocell:
It is a very powerful polarized mirror reflection sensor located at a distance of 250 mm from the ground. It
has a detection distance of 12 m, ideal for areas where there is a lot of dust or weather conditions that may
influence the detection distance.
And there are other optional systems to minimize the risk::
• Control by means of a pressure-maintained button.
• Warning signals to warn of operation.
• Traffic light:
This device has two lights (green and red) or three lights (green, yellow and red). When the door is opening or
is at its opening limit, the green light is on. A few seconds before the door begins to close, the orange light (if
there is one) comes on until the door begins to close, then the red light comes on.
• Flashing indicator:
This indicator is a light device programmed according to the required need. It can be programmed to be
active for the entire time the door is in operation (both opening and closing) or it can be programmed to come
on only while the door is closing.
• Sound warning:
A sound is produced every time the door is opened and closed.
In addition to the safety elements mentioned above, it is necessary that the users authorized to use the door are
trained in its operation
5. SAFETY
Summary of Contents for NovoFold
Page 73: ......
