28
29
REPLACE METER ASSEMBLY
3.
4.
Meter Cable
1.
2.
3.
Motor
Screws
Motor
1.
Disconnect the meter cable from the meter.
2.
Disconnect the valve from bypass by removing clips
3.
Remove the coupling adapter from the bypass
4.
Remove the meter and meter support from the bypass
and replace
1.
2.
REPLACE MOTOR
1.
Pull the powerhead cover
2.
Remove all connections from the circuit board
3.
Remove the motor screws and pull the motor out from powerhead
THE FOLLOWING ‘REPLACEMENT SECTION’, PAGES 31 TO 34 CONTAIN CONTENT THAT
SHOULD ONLY BE USED BY A QUALIFIED SERVICE TECHNICIAN:
