4
5
B
A
Specifications
485SIMTAN-100 485SIMTAN-150 485SIMTAN-200 485SIMTAN-300
Purolite 850 Models*
15010480-1
15010481-1
15010482-1
15010483-1
Purolite 860 Models*
15011480-1
15011481-1
15011482-1
15011483-1
Factory Settings - High Capacity
Salt Used - Per Regeneration
12.0 lbs
18.0 lbs
24.0 lbs
36.0 lbs
Water Used - Regeneration
64.3 gal
90.3 gal
124.6 gal
196.2 gal
Hardness Removal - Grains
30,000
45,000
60,000
90,000
Tannins Removal
2000 ppm
3000 ppm
4000 ppm
6000 ppm
Tank #1 Resin Quantity - Cubic Feet
1.0 ft
1.5 ft
2.0 ft
3.0 ft
Tank #2 Resin Quantity - Cubic Feet
1.0 ft
1.5 ft
2.0 ft
3.0 ft
Tank Size
9x48
10x54
12x52
14x65
Tank Jacket / Media Loaded
Yes
Yes
No
No
Brine Tank / Cabinet Size (Inches)
18.1 x 34.5
20.3 x 37.4
20.3 x 37.4
23.0 x 40.5
Salt Storage Capacity
240 lbs
350 lbs
350 lbs
420 lbs
Recommended Service Flow Rate
3.0 gpm
4.5 gpm
6.0 gpm
9.0 gpm
Back Wash Flow Rate
2.0 gpm
2.4 gpm
3.5 gpm
5.0 gpm
Shipping Weight
125 lbs
158 lbs
161 lbs
247 lbs
Regeneration Type
Counter-Current / Up Flow
Maximum Hardness
75 Grains Per Gallon
Maximum Tannins
3.0 ppm (Contact Customer Service for higher levels)
Maximum Iron (Ferrous)
10.0 ppm
Maximum Manganese
5.0 ppm
Plumbing Connections
3/4” (Optional 1”)
Resin Type
Purolite® SST-60/A850/A860
Electrical Requirements
Input 120V 60 Hz - Output 12V 650mA
Water Temperature
Min. 39 - Max. 100 Degrees Fahrenheit
Water Pressure
Min. 20 - Max. 125 psi
* CALL CUSTOMER SERVICE TO DETERMINE CORRECT MODEL. WATER TEST RESULTS REQUIRED
SPECIFICATION
SYSTEM DIMENSIONS
Working Temperature:
This unit must be
operated at temperatures between 40°F and
110°F (4°C - 43°C).
Working Pressure:
This water conditioner
must be operated on pressures
between 30 psi to 125 psi. If the water
pressure is higher than 125 PSI, use a
pressure reducing valve in the water supply
line to the conditioner .
Voltage = 120V / 60 Hz
Pipe Size = 3/4” and 1”
• At the stated service flow rates, the
pressure drop through these devices will
not exceed 15 psig.
• The manufacturer reserves the right
to make product improvements which
may deviate from the specifications
and descriptions stated herein, without
obligation to change previously
manufactured products or to note the
change.
* Do not use water that is microbiologically
unsafe without adequate disinfection
before or after the system.
Peak flow rates intended for intermittent
use only (10 minutes or less) and are for
residential applications only. Do not use
peak flow rate for commercial applications
or for a continuous rate when treated
water supplies are geothermal heat pump,
swimming pool, etc.
For satisfactory operation, the pumping rate
of the well system must equal or exceed
indicated backwash flow rate.
All units come with plastic bypass
Models
A (Inches) B (Inches)
485SIMTAN-100
48
9
485SIMTAN-150
54
10
485SIMTAN-200
52
12
485SIMTAN-300
65
14