11
BetterLiving
User Guide
Operation
– Control Panel
MAX
INFLATE
PRESSURE SETTING
AUTO
SOFT
FIRM
ALTERNATE
STATIC
MODE
POWER
3 SEC
3 SEC
ALARM MUTE
A
POWER FAIL
PRESSURE LOSS
PANEL LOCKOUT
H
C
B
A
D
F
G
E
A
Max Inflate
Rapidly inflates mattress to maximum pressure
in Static mode. System will automatically return
to Alternating mode after 20 minutes.
B
Pressure Setting
Allows manual adjustments to the automatic
pressure setting (within reasonable limits for
the patient’s detected weight). Press the button
to cycle from Soft to Firm pressure. Press the
button again to cycle back to Auto – green
indicator illuminates to indicate automatic
pressure setting is functioning.
C
Mode
Cycle between Static and Alternating modes.
Press the button to select required mode –
indicator glows green above the selected mode
to indicate the mode currently active.
See Mode on page 12 for more details
D
Power
Press and hold for a minimum of three seconds
to turn system power on and off.
Green light
= power on.
E
Alarm Mute
Turns audible alarm off temporarily. Press
to mute the alarm. Alarm will resound in 20
minutes if the issue has not been resolved, or
immediately if new fault detected.
F
Power Failure
During a power failure, amber light flashes and
an audible alarm sounds to alert carer.
G
Pressure Loss
Indicates mattress has failed to reach required
pressure. Indicator flashes amber and after five
minutes, an audible alarm sounds to alert carers
that the control unit has failed to reach the set
pressure. Refer to Troubleshooting for support.
H
Lock/Unlock
Lock and unlock the Control Unit panel to
prevent unwanted interference.
Press and hold the button for a minimum of
three seconds – a beep sounds and the light
illuminates to indicate system is locked. When
locked, only the Alarm Mute and Lock/Unlock
button remain operational.
Press again for at least three seconds to unlock
(beep sounds and light turns off).
