06/08 Rev. 4.05-01
USER MANUAL
Setting up
TTX
x50/67x
–
Wildcats/Wildcats plus
–
S 45/65/95/105
–
TDI/STDI/XXTREME
7
Changing material
1. Switch the printer to Offline mode and
press the FEED button briefly to lift the
print head.
2. To remove the material, press the
opener and pull the material out towards
the rear at the same time.
TTX / Wildcats
The material can also be moved out of
the print module automatically by
pressing ON/OFF + CUT.
TDI / STDI / XXTREME
1.
Move the magazine down by pressing
ON/OFF + FEED.
2.
Remove material from the unwinder or
magazine.
3.
Then proceed as described in the
section "Inserting material".
