Novell ZENworks 10 Configuration Management, Upgrade Manual

Page: 18 / 32

18 ZENworks 10 Configuration Management Upgrade Guide
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
To upgrade to 10.2:
5a (Conditional) Update the Primary Server hosting the ZENworks internal database from
10.1.
x to 10.2.
5b Update all other Primary Servers in the Management Zone from 10.1. x to 10.2 (order does
not matter).
5c Update managed devices from 10.1. x to 10.2.
For more information about System Update, see “ ZENworks System Updates ” in the
ZENworks 10 Configuration Management System Administration Reference .
6 Use System Update to upgrade ZENworks Servers and managed devices from ZENworks
Configuration Management 10.2.
x to 10.3.
The ZENworks 10 Configuration Management SP3 (10.3) update is cumulative, meaning that
you can upgrade Primary Servers and managed devices directly to version 10.3 from the
following versions:
Š
ZENworks 10 Configuration Management SP2 (10.2)
Š
Update for ZENworks 10 Configuration Management (10.2.1)
Š
Update for ZENworks 10 Configuration Management (10.2.2)
IMPORTANT: Before applying version 10.3, you should remove the earlier updates for
ZENworks 10 Configuration Management from ZENworks Control Center.
To upgrade to 10.3:
6a (Conditional) Update the Primary Server hosting the ZENworks internal database from
10.2 to 10.3.
6b Update all other Primary Servers in the Management Zone from 10.2 to 10.3 (order does
not matter).
6c Update managed devices from 10.2 to 10.3.
For more information about System Update, see “
ZENworks System Updates ” in the
ZENworks 10 Configuration Management System Administration Reference .
IMPORTANT: After upgrading to ZENworks 10 Configuration Management SP3 (10.3), you
cannot install a ZENworks Primary Server from a previous version of ZENworks Configuration
Management in your SP3 Management Zone.
2.3 Post-Upgrade Tasks
Š
Section 2.3.1, “Reinstalling the Novell File Upload Extension,” on page 18
Š
Section 2.3.2, “Rebuilding the Embedded or External Sybase Database,” on page 19
2.3.1 Reinstalling the Novell File Upload Extension
If the ZENworks 10 Configuration Management File Upload extension is already installed on the
server that is running ZENworks Control Center, you must reinstall the Novell File Upload
Extension before performing any third-party Imaging operations. For detailed information on how to
reinstall the Novell File Upload Extension, see
Appendix A, “Reinstalling the Novell File Upload
Extension,” on page 29 .