Novell LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE 7-2007, Administration Manual

Page: 19 / 108

Using EVMS to Manage Devices 19
no
vd
ocx
(e
n)
6 Ap
ril 20
07
6a Select
lvm/system
, then click Add .
6b In the Create Logical Volume dialog box, select Format , then select Swap from the File
System drop-down menu.
6c Specify
swap
as the volume name.
6d
Specify 1 GB (recommended) for the swap volume.
The swap size should be 128 MB or larger, with a recommended size of 1 GB. For an
explanation of this recommendation, see
Step 4e .
6e Specify the mount point as swap .
6f Click OK .
7 Create the system volume in the
lvm/ system
container:
7a Select
lvm/system
, then click Add .
7b In the Create Logical Volume dialog box, select Format , then select the file system to use
from the File System drop-down menu, such as Reiser or Ext3 .
7c
In the Volume Name field, specify a volume name, such as
sys_lx
.
7d In the Size field, click Max to set the size of the system volume as the remaining space
available in the
lvm/ system
partition.
7e Specify the mount point as
/
(root volume).
7f Click OK .
8 Click Next to return to the list of devices.
Below is an example of the physical and logical devices that should be configured on your
system. Your setup depends on the number of devices in the server and the sizes you choose for
your partitions.
9 Click Next to return to the Installation Settings page.
You can dismiss the message warning that you should not mix EVMS and non-EVMS
partitions on the same device.
10 Continue with the SLES installation.
Device Size F Type Mount Start End Used By
/dev/hda
149.0 GB 6Y160p0 0 19456
/dev/hda1
305.9 MB F Linux Native
(Reiser)
/boot
0 38
/dev/hda2
20.0 GB Linux LVM 39 2649 EVMS
lvm/
system
/dev/hdb
111.8 GB SP1203N 0 14595
/dev/evms/lvm/system/
sys_lx
10.0 GB F EVMS
/
- -
/dev/evms/lvm/system/
swap
1.0 GB F EVMS
swap
- -