Novell LINUX ENTERPRISE 11 - HIGH AVAILABILITY, Manual, Page: 75 / 298

crm(live)# configure
crm(live)configure# primitive nfs_resource lsb:nfsserver
crm(live)configure# primitive ip_resource ocf:heartbeat:IPaddr \
params ip=10.10.0.1
crm(live)configure# group nfs_group nfs_resource ip_resource
crm(live)configure# commit
crm(live)configure# end
crm(live)# quit
5.4 Creating a STONITH Resource
From the
crm
perspective, a STONITH device is just another resource. To create a
STONITH resource, proceed as follows:
1
Run the
crm
command as system administrator. The prompt changes to
crm(live)
.
2 Get a list of all STONITH types with the following command:
crm(live)# ra list stonith
apcmaster
apcsmart baytech
cyclades drac3 external/drac5
external/hmchttp external/ibmrsa external/ibmrsa-telnet
external/ipmi external/kdumpcheck external/rackpdu
external/riloe external/sbd external/ssh
external/vmware external/xen0 external/xen0-ha
ibmhmc ipmilan meatware
null nw_rpc100s rcd_serial
rps10 ssh suicide
3 Choose a STONITH type from the above list and view the list of possible options.
Use the following command (press
Q to close the viewer):
crm(live)# ra meta external/ipmi stonith
IPMI STONITH external device (stonith:external/ipmi)
IPMI-based host reset
Parameters (* denotes required, [] the default):
...
4
Create the STONITH resource with the class
stonith
, the type you have chosen
in Step 3, and the respective parameters if needed, for example:
crm(live)# configure
crm(live)configure# primitive my-stonith stonith:external/ipmi \
Configuring Cluster Resources From Command Line 65