Novell LINUX ENTERPRISE 11 - HIGH AVAILABILITY, Manual, Page: 147 / 298

I just get a failed message. Is it possible to get more information?
You may always add the
-V
parameter to your commands. If you do that multiple
times, the debug output becomes very verbose.
How can I clean up my resources?
If you know the IDs of your resources (which you can get with
crm_resource
-L
), remove a specific one with
crm_resource -C -r resource id -H
HOST
.
I can not mount an ocfs2 device.
Check
/var/log/message
if there is the following line:
Jan 12 09:58:55 clusternode2 lrmd: [3487]: info: RA output:
(o2cb:1:start:stderr) 2009/01/12_09:58:55
ERROR: Could not load ocfs2_stackglue
Jan 12 16:04:22 clusternode2 modprobe: FATAL: Module ocfs2_stackglue not
found.
In this case the kernel module
ocfs2_stackglue.ko
is missing. Install the
package
ocfs2-kmp-default
,
ocfs2-kmp-pae
or
ocfs2-kmp-xen
de-
pending on the installed kernel.
15.4 Fore More Information
For additional information about high availability on Linux and Heartbeat including
configuring cluster resources and managing and customizing a Heartbeat cluster, see
http://clusterlabs.org/wiki/Documentation
.
Troubleshooting 137