Performing an In-place Upgrade
83
no
vd
ocx
(e
n)
17
Sep
te
m
be
r 20
09
13.4 Upgrading Designer
Before upgrading Designer, make sure you export your projects to create a backup of them. For
instructions on how to export your project, see “
Exporting a Project
”in the
Designer 3.5 for Identity
Manager 3.6 Administration Guide
. For upgrade information, see “
Converting Earlier Projects
” in
Designer 3.5 for Identity Manager 3.6 Administration Guide
.
13.5 Upgrading the Metadirectory Engine and
Driver Configuration Files
After the supporting components have been upgraded, the Metadirectory engine is upgraded. During
the upgrade process, the driver configuration files that are stored in the file system are updated.
1
Verify that the drivers are stopped. For instructions, see
Section 13.2, “Stopping the Drivers,”
on page 81
.
2
Install Identity Manager 3.6.1.
The steps to upgrade to Identity Manager 3.6.1 are the same as the ones for installing Identity
Manager 3.6.1. See
Chapter 7, “Installing Identity Manager,” on page 55
for the instructions on
how to install Identity Manager.
Installing Identity Manager 3.6.1 overwrites the previous versions of Identity Manager,
updating the binaries, extending the schema, and updating the driver configuration files.
NOTE:
After upgrading Identity Manager from 32-bit to 64-bit, the
Groupwise
driver and the
native custom drivers do not work.
13.6 Upgrading the Remote Loader
If you are running the Remote Loader, you also need to upgrade the Remote Loader files.
1
Create a backup of the Remote Loader configuration files. The default location of the files is as
follows:
Windows:
C:\Novell\RemoteLoader\
remoteloadername
-config.txt
Linux:
Create your own configuration file in the path of rdxml.
2
Verify that the drivers are stopped. For instructions, see
Section 13.2, “Stopping the Drivers,”
on page 81
.
3
Stop the Remote Loader service or daemon for each driver.
Windows:
In the Remote Loader Console, select the Remote Loader instance, then click
Stop
.
Linux:
rdxml -config
path_to_configfile
-u
Java Remote Loader:
dirxml_jremote -config
path_to_configfile
-u
4
Run the installation programs for the Remote Loader.
The installation process updates the files and binaries to the current version. For more
information, see
Section 7.3, “Installing the Remote Loader,” on page 59
.
5
After the installation completes, verify that your configuration files contain your environment’s
information.
Summary of Contents for IDENTITY MANAGER 3.6.1
