Novell GROUPWISE 7 - WEB ACCESS, Manual, Page: 58 / 110

Share

Page: 58 / 110

Novell GROUPWISE 7 - WEB ACCESS Manual Download Page 58

910

GroupWise 7 Administration Guide

no

vd

ocx (

e

n)

1

1

Decemb

er

2

007

In the Viewer Agent startup file, you can configure the following aspects of Viewer Agent
functioning:

Section 54.8.1, “Viewer Agent Web Console,” on page 910

Section 54.8.2, “Document Conversion,” on page 910

Section 54.8.3, “Document Quarantine,” on page 911

Section 54.8.4, “Document Cache,” on page 911

Section 54.8.5, “Agent Performance,” on page 912

Section 54.8.6, “Agent Log Files,” on page 912

Section 54.8.7, “Client/Server Configuration,” on page 912

54.8.1 Viewer Agent Web Console

As with the other GroupWise agents, you can view configuration and status information about the
Viewer Agent in your Web browser. To enable the Viewer Agent Web console, enable the /http
startup switch in the Viewer Agent startup file. The default port number is 7439. By default, anyone
who knows the server IP address and port number can access the Viewer Agent Web console, but
you can configure the Viewer Agent to prompt for a username and password if desired.

The following switches configure the Viewer Agent Web console.

/http

/httpport

/httpuser

/httppw

After enabling the /http switch and restarting the WebAccess Agent, use the following URL to
display the Viewer Agent Web console:

http://

server_address

:7439

For more information, see

Section 56.3, “Monitoring the Document Viewer Agent,” on page 935

54.8.2 Document Conversion

The Viewer Agent creates a working directory named

gwdva.dir

under the directory where the

Viewer Agent program is installed. Under this directory, it uses the temp subdirectory for temporary
files created during file conversion. By default, if the Viewer Agent cannot determine the language
of a file it is trying to convert, it uses the ISO language code en for English.

The following switches configure the document conversion functionality of the Viewer Agent:

/temp

NetWare:

sys:\system

Linux:

/opt/novell/groupwise/agents/share

Windows:

c:\webacc

«
...
56
57
58
59
60
...
»

Summary of Contents for GROUPWISE 7 - WEB ACCESS















































































































Reviews:

No comments