Scaling Your WebAccess Installation
865
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
You can add the URL to any Web page. For example, if you are using the Web Services page as your
initial WebAccess page, you could add the URL to that page. You should add one URL for each
WebAccess Agent.
For example, suppose you had offices in three different locations and installed a WebAccess Agent
at each location to service the post offices at those locations. To enable the WebAccess Application
to redirect requests to the WebAccess Agent at the appropriate location, you could modify the Web
Services page to display a list of the locations. The modified page would include the following
HTML code (if WebAccess is running on NetWare or Windows):
<UL>
<LI><A HREF="http://172.16.5.18/gw/
webacc?GWAP.ip=172.16.6.10&GWAP.port=7204>San Francisco
</A></LI>
<LI><A HREF="http://172.16.5.18/gw/webacc?GWAP.ip=172.16.6.12>New York
</A></LI>
<LI><A HREF="http://172.16.5.18/gw/
webacc?GWAP.ip=172.16.6.33&GWAP.port=7203>London
</A></LI>
</UL>
The displayed HTML page would contain the following list of locations:
San Francisco
New York
London
When a user selects a location, the WebAccess Application routes all requests to the WebAccess
Agent at the selected location.
53.3.4 Assigning a Default WebAccess Agent to a Post Office
The WebAccess Application uses the post office’s default WebAccess Agent if no WebAccess Agent
has been specified in the WebAccess URL (see
Section 53.3.3, “Specifying a WebAccess Agent in
the WebAccess URL,” on page 864
) or if that WebAccess Agent is unavailable. This applies only if
you have multiple WebAccess Agents installed in your GroupWise system. If you have only one
WebAccess Agent, it services all post offices.
To assign a default WebAccess Agent to a post office:
1
In ConsoleOne, right-click the Post Office object, then click
Properties
.
2
Click
GroupWise > Default WebAccess
to display the Default WebAccess page.
German
de
Language
Code
Language
Code