Novell GROUPWISE 7 - DATABASES, Manual

Page: 56 / 89

426 GroupWise 7 Administration Guide
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
Š gwchk xx .dll
(Replace xx with your language code)
Š gwchk xx .chm
(Replace xx with your language code)
The GroupWise administrator can install these files by using SetupIP to install the GroupWise
Windows client, and selecting to install and enable GWCheck. The default for SetupIP is to install
GWCheck, but not enable GWCheck. The files are then copied to the
\novell\groupwise\gwcheck
directory. For additional information about SetupIP and
GWCheck, see “[GWCHECK]” on page 1087 .
If the client was installed from the installation program on the CD or the defaults are chosen for
SetupIP, the client user needs to copy the files from the GWCheck directory
(
\novell\groupwise\gwcheck
) to the main GroupWise directory
(
\novell\groupwise\
).
To run GWCheck:
1 From the Start menu, click Run , then browse to and double-click
gwcheck.exe
.
2 To view online help in GWCheck, click Help .
3 Continue with Section 34.1.5, “Performing Mailbox/Library Maintenance Using GWCheck,”
on page 429 .
34.1.3 Using GWCheck on Linux
Two versions of GWCheck are available on Linux, one for a graphical user interface (GUI)
environment and one for a text-only environment.
Š
“Using GUI GWCheck (gwcheck)” on page 426
Š
“Using Text-Based GWCheck (gwcheckt)” on page 427
Using GUI GWCheck (gwcheck)
You can use GUI GWCheck on any Linux workstation where you can run the Cross-Platform client.
By default, GWCheck is installed with the client when using the GroupWise installation program. If