Novell ACCESS MANAGER 3.1 SP2 - README 2010, Manual

Page: 310 / 374

310 Novell Access Manager 3.1 SP2 Identity Server Guide
n
ov
do
cx (e
n)
16
Ap
ril 20
10
2 Configure the following fields:
Name: The name you want to give the map.
Description: A description of the map.
Access Rights: A drop-down menu that provide the broadest control for the page. If you set
this to Read/Write , you can specify rights for individual data items.
In order for user provisioning to succeed, you must select Read/Write from the Access Rights
drop-down menu for any maps that use an attribute during user provisioning.
User Stores: The user store that a map applies to. If a user logs into a user store that is not in
the map’s user store list, that map is not used to read or write attributes for that user.
3 In the LDAP Attribute Name field, type the LDAP attribute name that you want to map to the
Liberty Employee Status element.
4 In the LDAP Attribute Value fields, type the predefined LDAP attribute values that you want to
map to the Liberty Employee Status values.
These are the values that you want to store in the LDAP attribute for each given Liberty
attribute value. The LDAP attribute map then maps the actual Liberty URI value, back and
forth, to this supplied value.
5 Click Finish .
6 On the LDAP Attribute Mapping page, click OK .
7
Update the Identity Server.