Novell ACCESS MANAGER 3.1 SP2 - README 2010, Manual

Page: 151 / 374

Configuring Advanced Local Authentication Procedures 151
n
ov
do
cx (e
n)
16
Ap
ril 20
10
2
On the Create User Store page, fill the following fields:
Name: A display name for the eDirectory replica (for example,
nescm_replica
).
Admin Name: The distinguished name of the admin user of the directory. Administrator-level
rights are required for setting up a user store.
Admin Password and Confirm Password: The password for the admin user and the
confirmation for the password.
Directory Type: Select eDirectory.
3
In the Server replica section, click New , and fill the following fields:
Name: The display name for the LDAP directory server (for example,
nescm_server
).
IP Address: The IP address of the LDAP directory server. The port is set automatically to the
standard LDAP ports.
4 Click Use secure LDAP connections . You must enable SSL between the user store and the
Identity Server. The port changes to 636, which is the secure LDAP port.
5 Click Auto import trusted root .
6
Click OK to confirm the import.
7 Select the Root CA Certificate to trust any certificate signed by that certificate authority.
8
Specify an alias, then click OK .
An alias is a name you use to identify the certificate used by Access Manager.
9
Click Close , then click OK .
10 Under Server Replicas , verify the Validation Status .