15
Maintenance
• Clean parts of this product such as water tank, sink, transducer, filters, etc every
week.
ATTENTION:
DISCONNECT THE POWER BEFORE CLEANING.
• Use soft cloth for regular cleaning. The cleaning steps are:
Step 1: To mix citric acid in 60 degree hot water (10mL water: 1g acid).
Step 2: To pour mixed liquid on the scale. Wait for 5 minutes.
Step 3: To gently scrub the surface of dirty sink.
• How to clean water tank knob.
Step 1 : Soak in white vinegar on an useless bottle for 15 min.
Step 2: Gently shake the bottle, and rinse the knob with clean water.
• If you do not use the product for a long time, you have to fold the parts in original
packing box in dry place.
• Hard cleaning object is not suitable for the transducer.
• Clear water is much better than kitchen detergent.
• Chemical solvent, gasoline, polishing powder, etc are forbidden in cleaning.
• Keeping clean water in tank is necessarily. A frequent water changing is suggested.
Remember that before performing any activity consisting of opening, lifting
or replacing disconnect the device from the power supply !!!
TROUBLESHOOTING
Problem
Possible reasons
Solution
Huidifier doesn't work
No power supply
Connect power supply, switch on
No wind or fog
Excessive water level in sink
Pour some water out and tight the
knob
Weak fog
Scale in transducer
Dirty water
Clean the transducer
Keep fresh and clear water
Noisy
Low water level
The device is tilted or on an uneven
surface
Add water
Put machine on a solid floor
Overflow fog from sides
Gap between nozzle and water tank
Wet the nozzle before using
No flowing water
Dirty water tank knob or skew water
tank
Clean the knob or square the tank
If the above tips did not solve the problems with the operation of the humidifier, contact
with our service center.
