N'oveen ECM490, User Manual

Page: 6 / 35

ENGLISH EN
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND SAVE IT
Thank you for choosing our product. Read carefully before assembling, installing, turning on
or maintaining this device. Protect yourself and others by following the safety instructions.
SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be followed,
including the following:
1. Read all instructions before using
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical shock, do not immerse cord, plugs, or appliance in water or
other liquid.
4. Unplug from outlet when not in use and before cleaning.
5. Do not operate appliance with a damaged cord or plug or after the appliance malfunctions
or has been damaged in any manner. No user-serviceable parts inside. Return appliance to
the nearest authorized service facility or call service number for information on examination,
repair, or adjustment.
6. The use of accessory attachments not recommended by the appliance manufacturer may
cause injuries.
7. Do not use outdoors.
8. Do not let cord hang over edge of table or counter, or touch hot surfaces.
9. Do not place on or near a hot gas or electric burner, or in a heated oven.
10. To preheat the unit about 3 minutes before using.
11. This appliance is for household use only.
12. Close supervision is necessary when any appliance is used by or near children.
13. Do not use the unit near gas or other inflammable materials (such as benzene, paint
thinner, sprays, etc.)
14. This product should not be used in the immediate vicinity of water, such as bathtub,
washbowls, swimming pool etc. where the likelihood of immersion or splashing could occur.
15. Do not leave the appliance unattended when switched on.
16. Do not use appliance for other than intended use.
17. To disconnect, remove plug from wall outlet.
18. Extreme caution must be used when moving an appliance containing hot oil or other hot
liquids.
WARNING: To prevent electric shock, unplug before cleaning.
19. If the supply cord is damaged, it must be replaced by manufacturer, its service agent or
6