Ex-Power DEFENDER – Operation and Maintenance Manual
Novatio Engineering Confidential Document
5-13
5.
Turn ON the generator and start engine as described in section 3.3
6.
Allow engine to run for 2-5 minutes, then disconnect the jump start cable from the 2590
battery.
7.
Install the dust cover and bundle the jump start cable into the generator
8.
Reinstall the side cover and let the generator run for at least 1 hour to fully charge the
batteries inside the generator.
Figure 5-14: Jump Start Cable Location
5.9
Transporting Ex-Power DEFENDER
Do not lay the generator on its side when moving, storing, or operating. Oil may
leak and damage engine or property.
Allow the generator to cool for at least 15 minutes before loading the generator on the transport
vehicle. A hot engine and exhaust system can cause burns and can ignite some material.
To prevent fuel spillage when transporting, the generator should be secured upright in its normal
operating position, with the engine switch OFF and the fuel tank cap vent lever turned fully
counterclockwise to the OFF position. Take care not to drop or strike the generator when
transporting. Do not place heavy objects on the generator.
CAUTION
Summary of Contents for Ex-Power DEFENDER
Page 44: ...NOTES...
