This parameter controls the depth of to which the selected LFO waveform will modulate the
Chorus effect. The range is “00” to “99”. A value of “00” will produce only a slight amount of
modulation, producing only a slight swirling stereo sensation. At a value of “50” the chorus
effect is quite noticeable and at a value of “99” the chorus will produce almost vibrato like
effects. This parameter is memorised with the program.
Page 3 - Distortion Drive
Ident
Value
This display will alternate between “dS” ident ( Distortion Drive ) and it’s value. Use the Data Entry / Portamento Rotary
control to adjust the value of this parameter. This parameter controls the drive of the Distortion effect. The range is:
“oF”
=
Off or bypassed. No Distortion effect.
“01” to “99”
=
Level of drive to the Distortion effect.
Low levels of drive produce a warm “edge” or “crunch” to a sound. High levels of drive really compress the sound and add
a much harder quality to a sound. This parameter is memorised with the program.
Data Entry/Program
Utilities/Distortion
36
MIDI RX CH
MIDI TX CH
PROGRAM
EDIT
WRITE
UTILITY
SAVE
MIDI RX CH
MIDI TX CH
PROGRAM
EDIT
WRITE
UTILITY
SAVE
