manualshive.com logo in svg

Novatel Sprint mifi 4082, Getting Started

Share
Download
Novatel Sprint mifi 4082 Getting Started Download Page 75

72

Regulatory

Federal Communications Commission Notice (FCC United States)

This equipment has been tested to, and found to be within the acceptable limits for a Class B digital device, 

pursuant to part 15 of the FCC Rules and Industry Canada ICES-003. These limits are designed to provide 

reasonable protection against harmful interference when the equipment is operated in a residential 

environment. 

This equipment generates radio frequency energy and is designed for use in accordance with the 

manufacturer’s user manual. However, there is no guarantee that interference will not occur in any particular 

installation. 

If this equipment causes harmful interference to radio or television reception, which can be determined by 

turning the equipment off and on, you are encouraged to try to correct the interference by one or more of 

the following measures:

• 

Reorient or relocate the receiving antenna.

• 

Increase the separation between the equipment and the receiver.

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• 

Consult the dealer or an experienced radio/television technician for help.

This device complies with Part 15 of the Federal Communications Commission (FCC) Rules and Industry 

Canada ICES-003 for EMI compliance.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired 

operation.

WARNING: DO NOT ATTEMPT TO SERVICE THE WIRELESS COMMUNICATION DEVICE YOURSELF. SUCH ACTION 

MAY VOID THE WARRANTY. THE MiFi DEVICE IS FACTORY TUNED. NO CUSTOMER CALIBRATION OR TUNING 

IS REQUIRED. CONTACT TECHNICAL SUPPORT FOR INFORMATION ABOUT SERVICING YOUR WIRELESS 

COMMUNICATION DEVICE.

Notice to Consumers:

 Any changes or modification not expressly approved by the party responsible for 

compliance could void the user’s authority to operate this equipment.

NOTE: 

The Radio Frequency (RF) emitter installed in your device must not be located or operated in 

conjunction with any other antenna or transmitter, unless specifically authorized by Novatel Wireless 

Technologies.

MODIFICATIONS:

 The FCC requires that you be notified that any changes or modifications made to this device 

that are not expressly approved by your service provider may void your authority to operate the equipment.

FCC Equipment Authorization ID:

PKRNVWMIFI4082

Summary of Contents for Sprint mifi 4082























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands