![Novatel SA-G+ User Manual Download Page 19](http://html1.mh-extra.com/html/novatel/sa-g/sa-g_user-manual_1711366019.webp)
9
novatelwireless.com
Power
The SA-G+ requires 6-32 VDC input class 2 power source.
Name & Function
Parameter/Condition
Variable
Min
Max
Units
Power Input
The input voltage must not exceed 32.0 Vdc for any
time period.
V
IN
6.0
32.0
Vdc
DC Input
Operation below 6.0 Vdc is not guaranteed.
LEDs
The SA-G+ modem has one green LED on the front panel to indicate network registration status. The LED flashes
when attempting to register on a network. The LED remains solid after it registers with a network.
During the firmware upgrade, the LED’s will display the following behavior:
l
SIM Installed (registered with network): Solid
l
SIM Not Installed (registering with network, LED is on): Solid
l
SIM Not Installed (registering with network, LED is off): Off
Connectors
The SA-G+ includes an 8-Pin I/O connector, a 9-Pin Serial Connector, and an Antenna Connector.
Figure 2-1 SA-G+ Connectors
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from