9
novatelwireless.com
Operating Power
The Expedite L10-G module requires an in/out voltage of 3.3V to 4.35V. The supply ripple
must be less than 200 mV across all frequencies.
Typical Input Current
Typical Results @ 3.8 V 25 deg C, with 1
μ
F at connector input on V
BAT
and RF terminated into
a 50
Ω
resistive load. Traffic Data Rate: Full
Band
Mode
Avg
(mA)
Peak
(mA)
Notes
GSM850
PCL=5, TX=32.5dBm
211
1810
GPRS, 1TX
PCL=19, TX=5dBm
59.8
-
EGSM
PCL=5, TX=32.5dBm
231
2040
GPRS, 1TX
PCL=19, TX=5dBm
59.6
-
DCS
PCL=0, TX=29.5dBm
142
1140
GPRS, 1TX
PCL=15, TX=0dBm
57.3
-
PCS
PCL=0, TX=29.5dBm
149
1190
GPRS, 1TX
PCL=15, TX=0dBm
57.9
-
Both
Sleep with Paging Multi-frames=5
<1
90
Modem registered; peak during network activity
Both
Sleep
< 0.9
-
Both
Shutdown
0.25
0.3
For minimum current draw in shut down mode, we
recommend you shut down the modem by either
sending AT$OFF (AT$OFFDLY must be >0) or by send-
ing a pulse on PON line (pin 35), and then setting the
ON/OFF line (pin 37) low to remove power from the
device.
