48
Preferences
The Preferences page contains the following:
•
USB Mode
— The
USB mode
menu changes the USB mode to
Ethernet over USB
or
Charge
only
.
•
Charge only
— If selected, the Jetpack will only draw power from the USB port. No
communication is possible between your computer and this device when connected
via USB. Note that a standard USB port does not provide sufficient current to power this
device, so the battery will still be depleted.
•
Ethernet over USB
— If selected, an Ethernet (TCP/IP) connection is established between
the Jetpack and your computer. The computer can access the Internet and the Web-based
interface via the USB connection. For Windows XP, drivers must be installed to enable
Ethernet over USB. The link to download and install these drivers is located on the Home
page. If Ethernet over USB is not available, you can still communicate via Wi-Fi.
•
Automatic shutdown
— The
Automatic shutdown
menu changes the amount of time (
After
5 minutes
,
After 10 minutes
,
After 30 minutes
or
Never)
that expires before the Jetpack
automatically shuts down.
•
Turn off display
— The
Turn off display
menu changes the amount of time (
After 30 seconds
,
After 1 minute
,
After 5 minutes
or
Never)
that expires before the display turns off.
•
Save Changes —
Click
Save Changes
whenever you make a change to finalize and save the
new setting.
