Novatel 42G1215A-XT-1, Manual

Page: 7 / 8

7
PHASE CENTRE
Please refer to the Mechanical Drawings before reading this section.
HEIGHT = Vertical phase centre offset from antenna reference point or antenna reference plane (ARP),
see the MECHANICAL DRAWINGS section of this guide.
For relative offset numbers and phase centre variation (PCV) tables, please visit the U.S. National
Geodetic Survey (NGS) website at
www.ngs.noaa.gov/ANTCAL/ . Look for ANTCOM ACC42G1215A_XT1.
Please check our website for updates to this manual at www.novatel.com/Downloads/docupdates.html and
the websites mentioned above.
If you need any further advice on this matter, please visit our website at www.novatel.com . Other methods
of contacting Customer Service can be found on the last panel of this guide.