2
3. Attach the antenna to the surface using the four mounting screws supplied. The o-ring will compress
and create a seal between the surface and the antenna.
Ref. #
Description
1
Antenna
2
Countersink screws
3
Mounting surface
4
O-ring
5
Pre-drilled mounting holes
4. Remove the dust cap from the antenna’s TNC connector.
5. Attach the male TNC connector of the coaxial cable to the antenna’s TNC connector.
Ref.#
Description
1
Antenna screwed into place
2
Surface
3
TNC connector (male)
4
Coaxial cable (female)
6. Attach the other end of the coaxial cable to the antenna input port of the receiving device. The receiv-
ing device must be able to provide power as detailed in the
SPECIFICATIONS
section of this guide. All
NovAtel GPS receivers provide the necessary power through their antenna RF connectors.
