NovaWheel Instruction Manual
11
Document#: IM NW400-2000_10-07-08
NW Series NovaWheel Dryer
INSTRUCTION MANUAL
7. NOVATOUCH CONTROL
Permissions:
Some of the information contained in this manual is a reprint of Siemens Manuals. Novatec Inc
obtained written permission to reprint portions, as needed, for this manual in 2001.
Trademarks:
All names identified by ® are registered trademarks of the Siemens AG. The remaining
trademarks in this publication may be trademarks whose use by third parties for their own
purposes could violate the rights of the owner.
All names identified by
TM
are registered trademarks of Novatec Inc. The remaining trademarks
in this publication may be trademarks whose use by third parties for their own purposes could
violate the rights of the owner.
System Specifications:
All information on the TP177M touch screen and the S7-200 series PLC can be obtained from
the Siemens websites shown below. In general, these products have all the necessary
approvals in more than 15 countries.
Manuals are available in 5 different languages.
http://www.automation.siemens.com/simatic/portal/html_76/techdoku.htm
http://www.ad.siemens.de/simatic/portal/html_76/techdoku.htm
System Conventions:
All information and data displays will appear two dimensional in configuration and flat.
All data entry points or operational features will appear three dimensional in configuration and
raised or depressed in appearance depending on their operational position.
When you touch an IO field on the HMI device touch screen, the numerical screen keyboard
will appear. The keyboard is automatically hidden again when input is complete.
