Instruction Manual ND IM 3 JAN 2017
Instruction Manual
IM ND 3 JAN 2017
Page 13
5.2 Choosing F° or C°
On the display under UPPER HEAT –
(NOTE: initial temps shown are the set points entered during testing.)
unt
Selecting F° or C° for Dew Point
1- Find the board behind the dew point display.
2- Press & HOLD one of the two white buttons.
3- The display will change to the new selection.
4- Release the button and the dew point readout
will be in the new selection.
1- Press the upper left and lower right
buttons at the same time.
2- The display will show Unt (Units).
Press the upper left button
“SELECT”
3-
Press or button to select C
for centigrade.
4-
Press
“ENTER”
to save change
and exit.
