VX6s All-in-One Controller
User Manual
3 Menu Operations
23
3.11 Facotry Reset
You can reset the device to factory settings.
Note:
After the reset, Window 1 is kept, with HDMI as the input source. The language
is English and the system mode is Direct by default.
The preset and OSD settings will not be cleared after the reset.
3.12 Communication Settings
This function is used to set the communication mode and network parameters.
Mode
Figure 3-28 Communication mode
USB first
When the VX6s is connected to the control computer via both the USB and
Ethernet ports, if the communication mode is set as
USB First
, the control
computer will communicate with the VX6s via the USB port.
LAN first
When the VX6s is connected to the control computer via both the USB and
Ethernet ports, if the communication mode is set as
LAN First
, the control
computer will communicate with the VX6s via the Ethernet port.
