- 6-
2)
After configuration, reset computer IP as automatic acquisition, select
Wireless setting -> Scan hot spots and determine the hot spot for
connection. The topological graph of bridge connection mode is as
shown below;
Prompt: Please refer to the PSD100-WiFi User Guide for mode bridge connection
schemes.
IP intelligent search
Prompt: If the DHCP service is opened, both the IP addresses of the notebook and
the control card are 192.168.10. *; If the DHCP service is closed, notebook and
control card all use the IP addresses configured by external routers. After the
wireless control card is successfully connected, the IP addresses of the notebook and
the control card are in the same network segment, for facilitating software search.
1)
Install and run the Nova LCT-Pluto in broadcast control computers
and click
System
->
Search All Display
;
