- 2-
Hardware Introduction
Prompt:
1)
Please do not directly switch PSD100-WiFi into local area networks by
network cables at the time of DHCP opening. As the DHCP of this card will
conflict with the DHCP service for routers in the local area network at the
time of opening and meanwhile, IP addresses will be distributed
simultaneously.
2)
When the PSD100-WiFi switches into routers, Huawei, TP-link, Tenda and net
gear brands are recommended for the guarantee of stability.
3)
When the bridge feature is used, the superior router under bridge
connection shall have the WDS function, otherwise, bridge connection will
fail. Mutual bridge connection can be realized among PSD100-WiFi systems
and for superior router, it is allowed to pre-confirm whether the WDS of the
superior router can be enabled. The mode is generally enabled.
4)
The default factory settings of control card are that DHCP service is disable.
5)
The default factory settings of control card are that router mode, users could
select the bridge mode according network interface
，
long press the WiFi
module reset button to restore factory settings.