MX40 Pro LED Display Controller User Manual
www.novastar.tech
19
6.4.6
Set Sync Source
Select a synchronization signal for the display frame rate and set the phase offset.
On the main menu screen, choose
Advanced Functions
>
Output Settings
>
Sync
.
Figure 6-15 Sync
Select
Sync Source
and then select the desired sync source from the drop-down options.
Active Source: Sync with the frame rate of the active source.
Genlock: Sync with the frame rate of the Genlock signal.
Internal: Sync with the frame rate of the controller's internal clock. When this option is selected, a related
parameter
Frame Rate
is displayed. You can select a value from its drop-down options.
Press the
BACK
button to go back to the upper level menu.
Select
Phase Offset
.
Choose
Adjustment Mode
and then select the desired mode from the drop-down options.
Off: Turn off the phase offset function.
Angle: The related parameter
Angle
can be set.
Fraction: The related parameter
Fraction
can be set.
Absolute: The related parameters
Lines
and
Pixels
can be set when the sync source is
Active Source
.
6.5
Set Layers (Alll-In-One Controller Mode only)
When the device working mode is All-In-One Controller, set the canvas size and the layers (up to 4) on the canvas.
On the main menu screen, select
Layer Settings
.
Figure 6-16 Layer settings
Select
Canvas Size
to enable the value editing status. Rotate the knob to change the value and press the knob to
confirm the value.
Select a layer and set the related parameters.
Status: Turn on or off the layer.
Input Source: Select an input source.
XI'AN
NOVASTAR
TECH
CO.,
LITD.
