Novanta JADAK FM-8, User Manual

Page: 44 / 89

JADAK FM-8/FM-9 User’s Manual
Code 128
Code 128 Defaults
Code 128 On/Off
Scan one of the codes below to enable or disable Code 128 decoding. Default = Enabled.
* Enable Disable
Code 128 Minimum and Maximum Length
Use the following commands in combination with numerical values to set the minimum
and maximum length. Default minimum length = 0. Default maximum length = 55.
The minimum and maximum length for this symbology can be set either by sending the
serial command shown under the barcodes below with a value between 0 and 55, or by
scanning one of the barcodes below and then set the length by scanning the digit codes
and the SAVE barcode in
Appendix B
. Please contact JADAK if assistance is needed.
Code 128 Minimum length Code 128 Maximum length
ISBT 128 On/Off
ISBT 128 is a variant of Code 128 used in the blood bank industry. Scan the appropriate
bar code below to enable or disable ISBT 128 concatenation. Default = Disabled.
Enable * Disable