•
If you are going to use the built in safety charge pump, configure your software to
output the safety charge signal to pin 17 and place the jumper on position 2-3. If you are
not going to use this feature, place the jumper in position 1-2. If you hardwire the EN
pin and disable the safety charge pump your outputs will be enabled at all times.
Confirm at this time that the output LED is lit. This indicates that the output signals are
getting through.
Summary of Contents for CD-100
Page 1: ...Novakon Systems Ltd CD 100 COMPUTER DRIVER OPERATOR S MANUAL ...
Page 2: ......
Page 28: ......
