background image

 

 

 

22 

Novak Electronics, Inc. 

                                              

www.teamnovak.com

 

 

Instruction Manual 

Product Warranty 

The NovaLink PC Interface software is guaranteed to be free from defects in materials or workmanship for 
a period of 120 days from the original date of purchase (verified by dated, itemized sales receipt). 

Warranty does not cover incorrect installation, components worn by use, damage to the circuit board or 
from excessive force or tampering with the internal electronics, exposing electronics to water, moisture, or 
any other foreign material, allowing exposed wiring to short-circuit, or any damage caused by a crash, 

flood, or other natural disaster. 
 

Because Novak Electronics, Inc. has no control over the connection and use of the NovaLink Interface and 
software or any other related electronics, no liability may be assumed, nor will be accepted, for any 

damage resulting from the use of this product. Every Novak NovaLink PC Interface is thoroughly tested 
before leaving our facility and is, therefore, considered operational. 

 
By the act of connecting/operating the NovaLink PC Interface, user accepts all resulting liability. In no 
case shall our liability exceed the product’s original cost. We reserve the right to modify warranty 

provisions without notice. 

 

 
 

 

 

This product is not intended for use by children under 14 years of age without the strict 
supervision of an adult. Use of this product in an uncontrolled manner may result in physical 
damage or injuries—take extra care when operating any remote control vehicle. 

 

 

 

 

 
 

 

 

 
 

 

 

 

17032 Armstrong Avenue 

Irvine, Ca 92614 

 

Phone: 949-833-8873

 

HU

www.teamnovak.com

 

© 2010 Novak Electronics, Inc. 

 All Rights Reserved 

 

No part of these instructions may be reproduced without the written permission of Novak Electronics, Inc.  

Microsoft, Windows XP, Windows Vista, and Windows 7 are trademarks of Microsoft Corporation in the U.S. and/or other countries. 

NovaLink, Dynamic Timing Advance, and Electronic Power Control are trademarks of Novak Electronics, Inc.

 

Summary of Contents for NOVALINK - V1.4























Reviews: