5. BATTERY REPLACEMENT
Sufficient battery
Quite sufficient battery
Weak battery
Empty battery
When the battery power is insufficient, the static
field meter cannot start normally. When it is
operating but the battery is low, the screen will
flash and then turn off automatically. At that
point, the battery needs to be replaced before
the measurer can work properly again.
Battery replacement: remove the battery cover
at the back of the static field meter, remove
the old battery from the buckle, fasten the new
battery, put it back into place and replace the
cover.
Note: Please turn off the power when not in
use. Do not replace the battery when the static
field meter is working to avoid any damage to
the device.
7
