(348) TRANSPORTSTELLUNG 0400-GB
GB
- 10 -
transpOrt- and WOrking pOsitiOn
Transport position - 3
Cutter bar to the rear and swivelled up (approx.
90°).
1. Swivel mower bar back as described in
"Transport
Position - 2".
2. Move mower bar into vertical position as described in
"Transport Position - 1".
- Secure cutter bar with hook (1).
. Before driving on roads always check correct
locking!
- Connect lighting and raise implement for transport.
- Before leaving the tractor lower cutter bar to ground!
Transport position - 4
Cutter bar laterally swivelled up (approx. 20°)
- this position upwards is limited by a stop buffer.
• only for turning manoeuvres in the field.
• do not use on roads or public thoroughfares!
Reducing the Total height
Before converting to transport position
• The external guard plate (10) can be swivelled in to
reduce the total height (- 0 cm) when in the transport
position.
Note:
For safety reasons
the mower
disks must be
at a complete
standstill before
swivelling the
guard plate.
02/00/06
TD48/00/21
30
c
m
10
02/00/07
