NOVA3D ELFIN, User Manual, Page: 54 / 57

深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
53
2. If the support structures have been generated in a different program than NovaMaker,
make sure that the model’s mesh is fixed and the raft properly adheres to the platform.
3. Make sure that the print has been properly prepared in NovaMaker, that is, its size and
plane dimension are within the print range. Each layer that should be parallel to the platform,
proper support size not too small to ensure successful printing.
4. Make sure that while preparing the file in NovaMaker you chose an appropriate
printing profile, that is, the print settings match the type of used resin. If the profile is correct,
enable
Additional support exposure time option and decrease the Platform lift speed in the
Parameter setting menu.
5. Check if the FEP film is not bent, deformed, or perforated. Replace the FEP film if you
notice such defects.
6. Contact the Support Center at: http://www.nova3dprinter.com/docs/index.html