NOVA3D ELFIN, User Manual, Page: 49 / 57

深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
48
3. Insert the resin filter into the funnel and put them together in the bottle with resin. Pour the
resin left in the vat through the filter and funnel. If it is necessary, use a plastic spatula. Once
you finish, clean the resin filter and the resin vat in a liquid detergent or alcohol.
NOTE!
It is advisable to filter the already used resin after each print. Mix it with the fresh resin
to make sure that there are no cured remains in the liquid, as they could have a negative
influence on the quality of the next print and shorten the resin lifespan.
1. Clean the resin vat with a paper towel. You can also use alcohol for that purpose.
2. Clean the platform, LCD screen and the resin vat. After that, install the resin vat back into
the printer and fasten the spherical button on both sides to fix it.