Nova NovaBox HD 831, Manual

Page: 33 / 46

10
CONNECTING UP
SWITCHING YOUR SET-TOP BOX
ON AND OFF
When you have connected your set-top box to
the power supply, the
S
indicator light on its front
panel lights up . This shows that your set-top box is
receiving power .
When your set-top box is in standby, the
S
indicator
light turns red; when your set-top box is out of
standby, the
S
indicator light turns green .
If your set-top box is in standby, press the standby
button (
S
) or the MENU button on the front panel
of your set-top box to turn on your set-top box . You
can also use the standby button (
S ), INFO button or
the MENU button on your remote control .
Never turn off your set-top box by simply
disconnecting it from the power supply . Use the
standby button (
S
) on your set-top box or your
remote control .
NOTE: The standby S indicator light turns off
when your set-top box is in ECO mode.
Power Saving:
To save power and money, and to
reduce greenhouse gas emissions,
please turn off your set-top box, using
the standby button, when it is not in
use.
B
Set-top box is out of standby .
Shown by green
S
indicator light .
Standby button (
S
)
INSERTING BATTERIES IN YOUR
REMOTE CONTROL
1 . Remove the back cover by sliding it down .
2 . Insert the two supplied ‘AA’ batteries into the
battery compartment .
Make sure you insert them the correct way round,
as shown by the
+
and
–
symbols in the battery
compartment .
3 . Replace the cover .
When you need to replace the batteries in your
remote control:
•
Always replace all the batteries at the same
time .
•
Please dispose of batteries in an
environmentally-responsible way (see page 2) .
•
Never throw used batteries into a fire .