9
Article 320170 Steam Station Plus
heating up, and is extinguished once
the iron has reached the set
temperature. You can now start ironing.
5 Whilst you are ironing you can give a
shot of steam by pressing the iron’s
steam button with your index finger. An
audible signal will be heard if you press
the steam button before the appliance
has reached the set temperature. Wait
until the appliance reaches the set
temperature.
6 When pausing during ironing stand the
iron upright on a flat surface, or return it
to the holder on the steam generator.
7 When you have finished ironing return
the iron to the holder on the steam
generator, and remove the plug from
the wall socket.
8 Allow the appliance to cool.
Topping up the water reservoir
• You can top up the water reservoir at
any time you wish; you can also add
water while the appliance is switched
on.
1 When the water level in the reservoir is
too low the steam generator’s pump will
make more noise, and the water-level
indicator light on the steam generator's
control panel (next to the water droplet
with a cross through it) will begin to
flash (red).
2 Remove the water reservoir from the
appliance immediately, and top it up
with water. (Follow the instructions
under ‘Filling the water reservoir’).
Stand-by function
1 The stand-by function will be switched
on automatically when the appliance is
not used for 15 minutes. The stand-by
light on the steam generator’s control
panel (‘auto off’) will now start to flash
(red and green).
2 Press the button on the control panel or
the iron’s steam button to switch the
appliance on again.
Dry ironing
1 You can interrupt the steam supply
whilst ironing by pressing the button on
the steam generator’s control panel one
or more times until only the ‘auto off’
indicator light is illuminated, as stated in
step 3 under ‘Ironing’.
2 You can stop the steam generator
whilst ironing by pressing the button on
the control panel for at least 4 seconds.
The steam generator will now be
switched off; the iron remains switched
on. The ‘auto off’ indicator light will now
illuminate (red).
3 Turn the steam generator on again by
pressing the button on the control panel
once.
Storage after use
1 Empty all the water remaining in the
appliance before storage.
2 Allow the appliance to cool down
completely before storage.
3 Store the iron vertically (upright); this
will prevent damage to the soleplate.
