5/12
The left area is TFT Displayer and touch, chick item or value with finger will to complete
operation of set light setting(parameters) or view light state.
The area on the right- h a n d side is rotary encoder with button, as auxiliary input interface,
if disable touch function, the encoder can be chosen to set or view the item, and then press
the encoder button to confirm the selection, rotary encoder again set the parameter value,
finally, Press encoder button one again to save value or setting.
Parameter
value
setting
When the selected item is value need to been modified, the dialog shown in will popup.
Modify
value
Can quickly modify value via pull the slider to the desired position, or click the
button of
‘up’ or ‘down’ whit finger on the right side to set the exact desired value, another way
is roll encoder on the right-hand side of panel.
Apply
value
When Value had been modified, then press the bottom of
‘apply’ in the left corner
to apply to the light, but
hav’t saved
；
Save
Value
Any time, click on the lower right corner of the "OK" button, the setting will been
saved into internal memory.
Boolean
parameter
setting
when the selected parameters is a Boolean value (such as ON or OFF), can directly modify
setting by chick corresponding item, the setting will been saved right now.
When the parameter is a key item, chick corresponding item, a dialog shown in will been popup
ask for the confirm. Chick
‘sure’ to confirm.
Sub
Menu
Parameter
