NOUVAG AG
MD20
No. 31842 14/06
15
8 Maintenance
8.1 Replacement of control unit fuse
Defective control unit fuses can be replaced by the user without outside help. They can be found at the
back of the device in the fuse compartment next to the main switch:
1) Plug out mains cable.
2) Open fuse compartment with a screw driver.
3) Replace defective fuse T 2A.
4) Insert fuseholder again and close fuse compartment.
5) Check displayed mains voltage on fuse compartment.
6) Plug back mains cable.
1. Displayed mains voltage
2. Fuse compartment
3. Clasp fuse compartment
4. Fuse 1
5. Fuse 2
8.2 Discarding instructions
When discarding the device, device components and accessories, please comply with the issued
statutory regulations.
With regard to the preservation of the environment old equipment may be returned to the distributor or
manufacturer.
Summary of Contents for md 20
Page 2: ......
Page 4: ......
Page 85: ...NOUVAG AG Anhang Appendix Appendice Appendice Apéndice ...
Page 86: ......
