Notifier AFP-300 Programming Manual Download Page 11 | Manualshive

Page: 11 / 48

background image

Autoprogram

3URJUDP &KDQJH

AFP-300/AFP-400 Programming PN 50259:C1 06/19/97

7

$XWRSURJUDPPLQJ

'HIDXOWV

Table 8 contains descriptions for the fields that display in the Autoprogram Default
screen for a detector:

Table 8 Autoprogram Default Fields

If a device exists in the control panel program, but is missing (no response from the
program), the control panel displays a screen similar to the following:

)LJXUH $XWRSURJUDP 'HYLFH 'LVSOD\ 6FUHHQ

•

To delete the device from memory, press Enter. The next new device appears in the
display.

•

To keep the device in memory, press <Esc>. The control panel displays the
Program Change screen.

Field

Description

SMOKE (PHOTO)

Type code of the detector.

DETECTOR ADDR 101

Default custom label: 101 (1=loop 1; 01=address 01).

Z03

1RWH <RX FDQ FKDQJH

]RQHV DV ZHOO DV DGG IRXU

PRUH ]RQHV IRU HDFK

GHWHFWRU·V &%(

Default zone selection:
Zone 01 (Heat detectors)
Zone 02 (Ion detectors)
Zone 03 (Photo detectors)
Zone 04 (Laser detectors)
Zone 05 (Multisensor)

AL:8 (Photo default)

AL:6 (Ion default)
AL:6 (LPX default)
AL:5 (Multisensor
default)

The Alarm sensitivity level, with 9 the least sensitive Alarm level
and 1 the most sensitive Alarm level.

PA:8 (Photo default)

PA:6 (Ion default)
PA:6 (LPX default)
PA:5 (Multisensor
default)

Shows the Pre-Alarm level setting—a number between 0 and 9—
as follows:
0 – no Pre-Alarm.
1 – most sensitive Pre-Alarm level.
9 – least sensitive Pre-Alarm level.

**

* The first asterisk (*) indicates the cooperative multi-detector
mode:
A combines the detector's alarm decision with the next address
above.
B combines the detector's alarm decision with the next address
below.
C combines the detector's alarm decision with the next address
above and the next address below.

* – the second asterisk (*) indicates Alarm Verification (V=on,
*=off). Refer to “Interpreting a Detector Status Display or
Maintenance Report” on page 42 for more information on the
Alarm Verification feature.

352*50 602.( ,21 '(7(&725 $''5

'(9,&( 127 $16:(5,1* '(/(7( )5 0(0 '

7\SH &RGH

7ZRGLJLW DGGUHVV

' GHWHFWRU RU 0 PRGXOH

6/& QXPEHU

«
...
9
10
11
12
13
...
»

Summary of Contents for AFP-300

















































Reviews:

No comments

Related manuals for AFP-300

Brand: NAD Pages: 4

Brand: NAD Pages: 4

Grafica DNE-K07

Brand: Paradox Pages: 24

Brand: Panosol Pages: 105

Brand: Pangolin Pages: 8

Brand: IBM Pages: 20

Brand: DAV TECH Pages: 24

Brand: OBSIDIAN CONTROL SYSTEMS Pages: 16

Optidrive Elevator

Brand: Invertek Pages: 5

Brand: Techtrol Pages: 4

Brand: Seneca Pages: 4

Brand: Beckhoff Pages: 30

Brand: Festo Pages: 109

Brand: Topworx Pages: 8

Brand: Pfeiffer Vacuum Pages: 100

Brand: jbc Pages: 16

Brand: Patton Pages: 56

Vision BT-A02 RF

Brand: Watts Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands