Nothern Industrial tools 331804, Owner'S Manual

Page: 8 / 15

7
Removing power bits
Ensure the tool has been switched off and the battery removed prior to removing power bits.
Pull the sleeve forward and then pull the power bit out of the sleeve.
Driving / removing screws
• Install the required power bit into the sleeve of the tool.
• Select the direction of rotation.
• Place the head of the power bit into the head of the screw. Ensure the power bits head
matches the head of the screw.
• Apply a forward pressure on the impact driver so the head of the power bit sits firmly in the
screw head. Ensure the impact driver is kept pointing straight to the screw.
• Squeeze the trigger to begin operation.
OPERATION FOR CORDLESS DRILL
Keyless Chuck
A keyless chuck has been provided with your drill to allow for easy installation and removal of
bits. The chuck is divided into two parts, the rear is called the collar and the front is the body.
To open and close the chuck; grasp and hold the collar of the chuck with one hand and rotate
the chuck body with your other hand. The arrows on the chuck indicate which direction to
rotate the chuck body in order to GRIP (tighten) or RELEASE (unlock) the drill bit.
WARNING! Do not hold the chuck body with one hand and use power of the drill to tighten
or loosen the chuck jaws. The chuck body could slip and your hand could come in contact
with a rotating accessory. This could cause an accident resulting in personal injury.
Installing Drill/Driver Bits
• Remove battery from the drill.
• Open or close the chuck to a point where the opening is slightly larger than drill bit you
intend to use.
• Insert the drill bit into the chuck ensuring the end of the drill bit does not touch the screw
inside the chuck.
• Tighten the chuck onto the drill bit as described above (Keyless Chuck).
Removing Drill/Driver Bits
• Remove the battery from the drill.
• Loosen the chuck as described above (Keyless Chuck).
• Remove the drill bit from the chuck.
Note: Do not handle drill bits without gloves as drill bits and other accessories are sharp and
can cause a personal injury.