Nothern Industrial tools 331804, Owner'S Manual

Page: 5 / 15

4
SAFETY INSTRUCTIONS FOR BATTERY PACK & CHARGER
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR
YOUR BATTERY CHARGER.
• Before using the charger, read all instructions and cautionary markings on charger, battery
pack and product using the battery pack.
Danger! If the battery packs casing is cracked or damaged, do not insert into charger.
There is a danger of electric shock or electrocution.
WARNING! Don't allow any liquid to get inside charger. Electric shock may result. To
facilitate cooling of the battery pack after use, avoid placing the charger or battery pack in a
warm environment such as in a metal shed, or an uninsulated trailer.
• This charger is not intended for any uses other than charging rechargeable batteries. Any
other use may result in risk of fire, electric shock or electrocution.
• Do not place any object on top of the charger or place the charger on a soft surface that
may result in excessive internal heat. Place the charger in a position away from any heat
source.
• To reduce the potential risk of damage to the electric plug and cord, pull by the plug rather
than the cord when disconnecting the charger from the power supply.
• Make sure the cord is located so it will not be stepped on, tripped over, or otherwise
subjected to damage or stress.
• An extension cord should not be used unless absolutely necessary. Use of an improper
extension cord could result in the risk of fire, electric shock or electrocution.
• Do not operate the charger if it has received a sharp blow, been dropped or otherwise
damaged in any way.
• Do not disassemble charger. Incorrect reassembling may result in a risk of electric shock,
electrocution or fire.
• To prevent the risk of electric shock, unplug the charger from the outlet before attempting
any cleaning. Only removing the battery pack from the charger will not reduce this risk.
• Never attempt to connect two chargers together.
• DO NOT store or use the tool and battery pack in locations where the temperature may
reach or exceed 104°F (40°C) (such as outside sheds or metal buildings in summer).
• The charger is designed to operate on standard household electrical power (110 to 120 volts).
Do not attempt to use it on any other voltage!