E
N
G
LI
S
H
5
INTRODUCTION
Thank you for buying the KEGORATOR from Nostalgia Electrics! This easy-
to-assemble unit keeps the beer flowing and the good times rolling in or
at every garage, barbeque or rec room. With a few basic parts and these
simple instructions, you'll be tapping your own keg in no time!
•
The kegorator comes with a 2.5 lb. CO2 bottle, which should
be able to dispense four 15 gallon kegs of beer.
•
Capacity: 6.0 cu. ft.
•
Unit dimensions: L 28.75" x W 21" x H 31.25" (not including tap tower)
•
Tap tower is 15" from base to highest point of handle
•
The following dimensions are recommended for clearances around the kegorator:
Sides …………………… ¾” (19 mm)
Back ……………………. 1” (25 mm)
•
Unit weight: 86 lbs
Compatible Keg Types
The kegorator can hold either one ¹
/6
Barrel Keg, one ¼ Barrel Short, one ¼
Barrel Slim or one ½ Barrel. This kegorator
DOES NOT
fit non-standard keg sizes.
NOTE:
Keg Coupler fits D-Sankey Keg
Valves. Attaching the Keg Coupler
will add height to the Keg.
Kegs
¹
/6
Barrel
¼ Barrel Short
¼ Barrel Slim
½ Barrel
Gallons
5.16
7.75
7.75
15.50
Keg Capacity
1
1
1
1
12 oz. Beers
55
82
82
165
Weight (Full
in lbs.)
58
87
87
161
