Norwood Kwik-Pit 26 Series, Operator'S Manual

Page: 9 / 133

1-3
1 - GENERAL INFORMATION
Determining Left and Right Side of the Machine
Operator Orientation - The directions Front (1), Back (2), Left (3), and Right (4) as mentioned throughout the manual, are
determined when standing at the rear of the tractor and looking toward the forward direction of travel.
Fig. # 1-5
4
3
2
1
Determining Orientation Using Directional Arrows
The symbols shown below, may be illustrated on certain pages in this manual, and where indicated, determine the front of
the machine.